상품상세정보 상품후기 상품QNA 배송교환관련 대현계측기(주) - METERMALL [EXTECH 7430] AC/DC내전압시험기(5KV) / 절연저항테스트 / USB RS232기본
열화상카메라 전력분석기 배너1 배너2 배너3 배너4 배너5 중앙롤링상품 타이틀배너 중앙작은배너 01 중앙작은배너 02 중앙이벤트배너 하단이벤트배너 01 하단이벤트배너 02 배송조회 가입하러가기 적립금확인하기 inicis 핀터레스트 페이스북 트위터 카카오 정품보장

커뮤니티 리스트

  • 온라인 견적문의
  • 검교정
  • 주문/배송조회
  • 고객만족센터
  • 무통장입금안내
[EXTECH 7430] AC/DC내전압시험기(5KV) / 절연저항테스트 / USB RS232기본
판매가격 : 전화문의
제품코드 : 7430
제조사 : EXTECH(익스텍)
브랜드 : EXTECH(익스텍) [브랜드바로가기]
구매수량

7400 시리즈는 ACW, DCW, IR, Ground Bond 등 전기적 Safety 테스트를 하나의 장비로 할 수 있는 장비 입니다.
특징
1. AC/DC Withstanding Voltage (ACW and DCW)/ Insulation Resistance (IR)/ Ground Bond (GND) tests
2. Single 20 x 2 LCD Display
3. Optional built-in 4 channels or 8 channels Scanner (7420, 7430 & 7440)
4. 50개의 메모리와 메모리당 30개의 스텝 저장 가능
5. Auto Offset, GB Test
6. Front panel software calibration
7. Built-in PLC Remote interface
8. Front Panel Lockout
9. GPIB (IEEE-488), RS232 or printer interfaces control
10. Line and load regulation maintains the output voltage within 1% of setting

7400 Series Electrical Safety Compliance Analyzer

MODEL 7410 7420 7430 7440
AC WITHSTAND VOLTAGE
Output Rating 5KVAC / 30mA 5KVAC / 30mA 5KVAC / 40mA 5KVAC / 40mA
Range Resolution Accuracy
Output Voltage,ACV 0 - 5000 1 ±(2% of setting + 5V)
Output Frequency 50Hz / 60Hz ± 0.1%, User Selectable
Output Waveform Sine Wave ,THD. < 2% (Resistive Load), Crest Factor = 1.3 - 1.5
Output Regulation ± (1% of output + 5V), From no load to full load
SETTINGS
Hi-Limit AC Current, mA 0 - 30.00 0 - 30.00 0 - 40.00 0 - 40.00
Resolution : 0.01, Accuracy : ±(2% of setting + 3counts)
Lo-Limit AC Current, mA Range : 0 - 9.999
Resolution : 0.001, Accuracy : ±(2% of setting + 3counts)
Ramp Time, second 0.1 - 999.9 0.1 ±(0.1% + 0.05sec)
Dwell Time, second 0, 0.3 - 999.9
(0=continuous)
0.1
Arc Detection The range is from 1 - 9 (9 is the most sensitive)
AC Current Offset, mA 0 - 2.000 or Auto Set
DC WITHSTAND VOLTAGE
Output Rating 6KVDC/9999μA
Output Voltage, DCV 0 - 6000 1 ±(2% of setting + 5V)
Output Ripple < 5% (6KV / 9999 μA at Resistive Load)
SETTINGS
Hi-Limit DC Current, µA 0 - 9999 1 ±(2% of setting + 3counts)
Lo-Limit DC Current, µA 0 - 999.9 0.1 ±(2% of setting + 3counts)
Ramp Time, second 0.1 - 999.9 0.1 ± (0.1% of setting + 0.05s)
Dwell Time, second 0, 0.4 - 999.9
(0=continuous)
0.1
Arc Detection The range is from 1 - 9 (9 is the most sensitive)
DC Current Offset, ?A 0 - 200.0 or Auto Set
Ramp High Current ON/OFF, User Selectable
Charge - Low Current, µA 0 - 350.0 or Auto Set
Discharge Time ? 200 msec
INSULATION RESISTANCE
Output Rating 1KVDC / 9999MΩ
Output Voltage, DCV 100 - 1000 1 ± (2% of setting + 3V)
Hi-Limit Resistance, MΩ 0, 1 - 9999 (0=OFF) 1 100 - 499V
1 - 999.9, ± (8% of setting + 2counts)
500 - 1000V
1 - 999.9, ± (2% of setting + 2counts)
1000 - 9999, ± (8% of setting + 2counts)
Lo-Limit Resistance, MΩ 1 - 9999 1
Delay Time, second 0, 0.5 - 999.9
(0=continuous)
0.1 ±(0.1% + 0.05sec)
Charge - Low Current, µA 0 - 3.500 or Auto Set
GROUND BOND (7440 ONLY)
Output Rating 30A / 600mΩ, 8V
Output AC Current, A 3.00 - 30.00 0.01 ± (2% of setting +3 counts)
Output AC Voltage, V 3.00 - 8.00 0.01 ± (2% of setting +3 counts) at Open circuit
Output Frequency 50Hz/60Hz ±100ppm, User Selectable
SETTINGS
Hi-Limit Resistance, mΩ 0 - 150 (3 - 30A) 1 ± (2% of setting +2 counts)
Lo-Limit Resistance, mΩ 0 - 600 (3 - 10A)
Lead Resistance Offset, mΩ 0 -200 1 ± (2% of setting +2 counts)
Dwell Time, second 0, 0.5 - 999.9 sec (0=continuous) 0.1 ± (0.1% of setting + 0.05s)
MEASUREMENT
AC/DC Voltage, KV 0 - 6.00 0.01 ±(1.5% of reading ) > 500V
±(1.5% of reading + 1 count) < 500V
DC Voltage, V (IR) 100 - 1000 1 ±(1.5% of reading + 3V)
AC Current Range, mA 0 - 3.500 0 - 3.500 0 - 3.500 0 - 3.500
3.00 - 30.00 3.00 - 30.00 3.00 - 40.00 3.00 - 40.00
AC Current Resolution, mA 0.001 / 0.01
AC Current Accuracy, mA ± (2% of reading + 3counts)
DC Current Range, µA 0 - 350.0 0.1 ± (2% of reading + 3counts)
300 - 3500 1
3000 - 9999 10
AC Current, A (GB) 0 - 35.00 0.01 ±(2% of reading+3counts)
Resistance, , MΩ(IR) 1 - 9999
(Auto Range)
0.001
0.01
0.1
1
100 - 499V
1 - 999.9, ± (8% of reading + 2counts)
500 - 1000V
1 - 999.9, ± (2% of reading + 2counts)
1000 - 9999, ± (8% of reading + 2counts)
Resistance, , mΩ (GB) 0 - 600 1 ±(2% of reading+2counts)
GENERAL
Input Voltage AC 115V / 230Vac ± 15%, 50Hz / 60Hz ± 5%, max. current 5A for 7410 model, max. current 6.3A for 7420 / 7430 / 7440 model
PLC Remote Control Input : Test, Reset, Memory1, 2, 3
Output : Pass, Fail, Processing
Memory 50 memories, 8 steps/memory
Display 20×2 LCD with back light
Key Lock To prevent unauthorized alteration of the test Parameters
Calibration Build-in software and external calibrated meters
Alarm Volume Setting Range: 0-9 ;0=OFF, 1 is softest volume, 9 is loudest volume.
Rear Panel Output YES YES YES YES
Built-in Scanner - 8 CHANNELS OPTION OPTION
External Scanner YES YES YES YES
Smart GFI YES YES YES YES
Analog Meter - - YES YES
RS232 Interface OPTION OPTION YES YES
GPIB Interface OPTION OPTION OPTION OPTION
Printer Interface OPTION OPTION OPTION OPTION
TUV-GS listed - - YES YES
CE Compliance - - YES YES
Environment 0-40℃, 20-80%RH
Dimension (W × H × D), mm 430 × 133 × 300 430 × 133 × 500 430 × 133 × 500
Net Weight 12Kg 18Kg 22Kg
STANDARD ACCESSORIES
Power Cord(10A) ×1
Fuses ×2 (Including a spare contained in the fuse holder)
Hipot Test Lead ,1.5m(1101) ×1
Return Test Cable(1102) ×1
Ground Bond Test Lead 30A, 1.5m (1103) - - - ×1
Ground Bond Return Lead 30A, 1.5m (1104) - - - ×1
Hipot Output Link Lead, 1.5m (1109) - ×8 - -
RS232 Link Cable 1.5m (1130) - - ×1 ×1
Disk (RS232 test program) - - ×1 ×1
*product specifications are subject to change without notice.
2020 구정


배송안내 및 교환/반품안내

 

 

  • 회사소개
  • 제휴안내
  • 이용안내
  • 개인정보취급방침
  • 이용약관
  • 고객센터
  • home
  • top

쇼핑몰정보

사업자정보확인

클릭하시면 이니시스 결제시스템의 유효성을 확인하실 수 있습니다.